Home Page

Product Information Technical Information Projects & Customers Details & Downloads Information Request Contact Us

Quality and Appearance at an Affordable Price

Major cost savings compared to composite panel systems

Custom fabricated to fit your project requirements

Large flat panel coverage. (Up to 45" x 117")

Wide selection of Kynar colors & finishes

Formed from 22 ga. Zincalume coated  steel
(also available in .032, .040, .050 aluminum)

Stiffener fully adhered with 3M tm high bond

 

Metposite is now manufacturing Artmetco
composite panel systems in the Pacific Northwest

Click here for more information on available ACM produ

ASTM tested Air, Water, Structural Performance

Our testing and credentials allows you to appreciate the cost savings using the Metposite System in place of high price aluminum composite systems and still have the confidence that your wall panel system will perform up to industry standards.

ASTM E 283-04
Air Infiltration:

0.00 CFM. (No Leakage) at 300 Pa (6.24 psf)

ASTM E 331-00
Water Penetration

0.00 CFM. (No Leakage) at 729 Pa (15.0 psf)

ASTM E-72
Structural Performance

Individual panel average ultimate load (held for one minute) 117lbs

ASTM E-1761a
Fastener Pull Through

Using a #8 mod. truss head / phillips wafer head screw average pull through or screw failure 881lbs.

.....
 

Metposite Panel Systems are available in multiple profile/joint configuration
(click on links below for more information)

Why Metposite is your quality flat wall panel system

 
 


Metposite STD
Backer rod and caulk
wall and soffit panel system


Metposite STD-DRI-RS
Gasketed (rain screen)
wall and soffit panel system


Met-Flush
Flush vertical joint
wall panel system


Met-Flush II

Flush vertical & horizontal
joints (limited applications)

Architects: Specifying Metposite allows you to save costs and lower project budget or free up funds for other areas of the project.

Contractors: Introduce Metposite.as a value engineered substitution, allows you make a higher margin as well as save money for the owner.

Owners: Asking your Architect to specify Metposite, or requesting your contractor to install Metposite, will lower your project costs.

 

 

Metposite Panel Systems are available in multiple stiffener/backing options
(click on links below for more information)

Architect's quick links to our information library
(click on links below for more information)

 
 


ISO 1"
1 layer of1"
poli-iso foam


Pro-Form 1.3"
1 layer or 10mm fluted
poli-pro & 1" iso foam


PRO .75"
2 layers or 10mm fluted
poli-pro


Core E-84 1"
1 layer of aluminum
honeycomb

 
       
...
...

Web Site Designed by Shadow Graphix    www.shadowgx.com

info@metposite,com    503.981.5900

Metposite LLC © 2008 All right reserved