|
|
|
Metposite
STD Joint Sealant
& Backer Rod
|
Use
Dow Corning ® 795 or Tremco Spectrum 1 ® for panel-to-panel joints.
For joints with other substrates please refer to Dow Corning’s or
Tremco specifications. (Available at www.dowcorning.com or
www.tremcosealents.com)
Use
ITP soft type manufactured by Industrial Thermo Polymers LTD. or Sof
® Rod manufactured by Applied Extrusion Technologies Inc. (See
product specification sheet in this section.)
|
|
Click
here to view Dow
Corning ® 795 product
specification sheet |
|
Metflush
/ Metflush II Butyl
Sealant
|
Utilizes factory or field applied butyl (as per manufactures
recommendations)
|
|
|
|
Underlayment |
|
Metposite panels can be installed over
most commercial vapor barriers.
|
|
For more information on the following
approved products, click on the links below.
|
|
|
|
Note:
Verify job requirements before installation of Metposite.tm panel system.
|
